Carefree 970616 Pioneer Arm

Convert your exsisting manual-spring driven awnining to a simple manual crank operated awning. No more springs, no more locking and unlocking travel locks or fishing for pull straps! Just turn the crank mechanism using the telescoping crank handle (included) and once it is fully open, slide the rafter arm up to the roller tube and tighten the rafter knobs. Now you can raise the roller with the lift handles to an desired pitch. It's that simple and easy!

• For an exceptionally taught canopy, backwind the crank. There's never a need to re-tension your canopy. To close, reverse the setup steps and crank in the opposite direction until the roller is tight against the coach. That is it you are ready for travel! The crank assembly automatically locks the roller in place.
• Uses the same mounting brackets (top & bottom) as the Carefree Fiesta & Spirit awnings for an easy installation. Keep your awning fabric and roller-remove the springs (carefully), discard the springs and the original arms and replace with this Carefree Pioneer Arm Set.
• Fits Arm Heights 81" to 97" (Arm height refers to the awning rail to floorline measurement).
• Fits Carefree awnings 1997 and newer.
• Notes: Please see Carefree's Installation Instructions for more details